System Control I/O modules
are used in modular systems like the CommSync II, CommSync
II-D, GSync and GSync II to provide remote control and
monitoring. In addition, they accept external
synchronization input for DTF (Distribution Time and Frequency)
systems. Communication with the System Control modules is
via an RS-232 or Ethernet interface. Ethernet versions also
provide control and monitoring via the Zyfer Monitor GUI as
well additional functionality such as NTP, SNTP and PTP.
Dual Port Ethernet I/O
Description
Part
No.
Dual Port
Ethernet I/O Module -
Provides two, independent 10/100 Base-Tx TCP/IP Ethernet ports
for remote configuration, control and monitoring of the system
via Telnet, Simple Network Management Protocol (SNMP versions 1,
2c, and 3), or Secure Shell (SSH). Dual independent Ethernet
ports allow the 385-4090 to be connected to separate networks
and to perform separate functions simultaneously. The module
supports IPv4 and IPv6 addressing, and also provides Network
Time Services (NTS) with Network Time Protocol (NTP versions 1,
2 & 3) and Simple NTP (SNTP), enabling the system to perform as
an network time server on the most advanced networks. Two RJ-45
connectors, one DE-9 (RS-232) and four status LED's.
385-4090-01
Dual Port
Ethernet I/O
Module with 1 PPS & 1, 5 & 10MHz BNC External Inputs -
Provides two, independent 10/100 Base-Tx TCP/IP Ethernet ports
for remote configuration, control and monitoring of the system
via Telnet, Simple Network Management Protocol (SNMP versions 1,
2c, and 3), or Secure Shell (SSH). Dual independent Ethernet
ports allow the 385-4090 to be connected to separate networks
and to perform separate functions simultaneously. The module
supports IPv4 and IPv6 addressing, and also provides Network
Time Services (NTS) with Network Time Protocol (NTP versions 1,
2 & 3) and Simple NTP (SNTP), enabling the system to perform as
an network time server on the most advanced networks. Two RJ-45
connectors, two BNC (F) connectors for External Reference 1 PPS
Sync Inputs or External 1, 5 or 10 MHz Frequency Inputs
and four status LED's.
385-4090-02
Dual Port
Ethernet I/O
Module with 1, 5 & 10MHz Fiber Optic External Inputs -
Provides two, independent 10/100 Base-Tx TCP/IP Ethernet ports
for remote configuration, control and monitoring of the system
via Telnet, Simple Network Management Protocol (SNMP versions 1,
2c, and 3), or Secure Shell (SSH). Dual independent Ethernet
ports allow the 385-4090 to be connected to separate networks
and to perform separate functions simultaneously. The module
supports IPv4 and IPv6 addressing, and also provides Network
Time Services (NTS) with Network Time Protocol (NTP versions 1,
2 & 3) and Simple NTP (SNTP), enabling the system to perform as
an network time server on the most advanced networks. Two RJ-45
connectors, two ST Fiber Optic Connectors for External Reference
1, 5 or 10 MHz Frequency Inputs and four status LED's.
GPS
Time and Frequency Systems
next
