PTPSync III Model 391

The PTPSync III comes configured with either a civil-use GPS receiver, using the C/A signal, or with a military SAASM GPS receiver, using either the L1-P(Y) or the L2-P(Y) signal. The standard off-the-shelf configuration supports the IEEE 1588-2008 (PTP v2) protocol as well as Network Time Protocol (NTP) and SNTP. The PTPSync III provides three I/O module slots for customization of the system using FEI-Zyfer’s hot-swappable option modules. Configurable option modules include IRIG, Have Quick, Programmable Clock Rate, Frequency Synthesizer, Phase Aligned, and Low Phase Noise outputs
(other options available).

There are two RS-232 communications ports and two Ethernet ports on the rear panel for remote system monitoring and control functions. This allows the system to be connected to a control PC or second network for system control and monitoring via Telnet or SNMP
with SSH.

IEEE 1588-2008 is designed for small LANs requiring precise timing and synchronization beyond what can be attained with NTP v4. FEI-Zyfer’s PTP v2 products are fully compliant with the IEEE 1588–2008 (PTP v2) protocol. PTP v2 includes enhancements over previous PTP versions, such as transparent clocks for improved accuracy, fault tolerance, and
faster update rates.
 

Comm. Port,
1 PPS, 10 MHz,
Antenna

IEEE 1588-2008 (PTP v2) Output Module and 3 additional
Hot-Swappable Output Option Module Slots

Power Supply
AC or DC