| |
|
|
|
|
| |
 |
Ruggedized
L1/L2 Antenna Kit -
Includes: 33 dB gain antenna and a 1" pipe mount adapter. (No
cable is included). Recommended for use in harsh
environmental conditions and military SAASM applications. For
use with all products that require L1 and L2 band GPS signals. |
0810400
|
|
| |
|
|
| |
 |
Standard
L1 Antenna Kit - Includes: 33 dB gain antenna, a 1" pipe
mount adapter, and a 50 ft coaxial cable. For use
with all currently active products (except NTPSync II and NTPSyncXLS) that only
require L1 band GPS signals.
(Not compatible with obsolete products: 325-XXX, 425-XXX,
365-XXX, 345-100, and 345-200).
|
0810384 |
|
| |
|
|
|
|
| |
 |
Ruggedized
L1 Antenna Kit
- Includes: 33 dB gain antenna, a 1" pipe mount adapter,
and a 50 ft coaxial cable. Recommended for use in harsh
environmental conditions and military applications. For use with
all products (except NTPSync II and NTPSyncXLS) that only require L1 band GPS
signals.
(Not compatible with obsolete products: 325-XXX, 425-XXX,
365-XXX, 345-100, and 345-200).
|
0810408 |
|
| |
|
|
|
|
| |
|
Ruggedized L1/L2 Antenna Kit -
Includes: 33 dB gain antenna, a 1" pipe mount adapter,
and a 50 ft coaxial cable. Recommended for
use in harsh environmental conditions and military SAASM
applications.
For use with all products that require L1 and L2 band
GPS signals. |
0810401 |
|
|
|
|
| |
L1 GPS Amplifiers with
Interference Filters |
|
|
| |
 |
15
dB L1 In-Line Amplifier - Dual SAW band-pass filters
provide improved system performance in areas with very
harsh signal environments. Configured with a female TNC
connector at both the input and output side. This
allows the amplifier to be placed in-line with the
antenna system's coaxial cable. Normally, the amplifier
is positioned within 6 ft of the antenna.
For use with all products (except NTPSync II and NTPSyncXLS) that only
require L1 band GPS signals. |
0810427 |
|
| |
|
|
|
|
| |
|
15
dB L1 Screw-On Amplifier - Dual SAW band-pass
filters provide improved system performance in areas
with very harsh signal environments. Configured with a
male TNC connector at the input side and a female TNC
connector at the output side.
This
allows the amplifier to screw directly on to the GPS
antenna without the need for additional cables. Extra
protection from the environment is provides to the
amplifier when the antenna is installed using a pipe
that also surrounds the amplifier.
For
use with all products (except NTPSync II and NTPSyncXLS) that only
require L1 band GPS signals. |
0810432 |
|
| |
|
|
| |
|
20 dB
L1 In-Line Amplifier -
Dual
SAW band-pass filters provide improved system
performance in areas with very harsh signal
environments. Configured with a female TNC connector at
both the input and output side. This allows the
amplifier to be placed in-line with the antenna system's
coaxial cable. Normally, the amplifier is positioned
within 6 ft of the antenna.
For use with all products (except NTPSync II and NTPSyncXLS) that
only require L1 band GPS signals.
|
0810428 |
|
| |
|
|
|
|
| |
|
20
dB L1 Screw-On Amplifier -
Dual
SAW band-pass filters provide improved system
performance in areas with very harsh signal
environments. Configured with a male TNC connector at
the input side and a female TNC connector at the output
side. This allows the amplifier to screw directly on
to the GPS antenna without the need for additional
cables. Extra protection from the environment is
provides to the amplifier when the antenna is installed
using a pipe that also surrounds the amplifier.
For use with all products (except NTPSync II and NTPSyncXLS) that
only require L1 band GPS signals. |
0810433 |
|
| |
|
|
| |
|
30
dB L1 In-Line Amplifier - Dual
SAW band-pass filters provide improved system
performance in areas with very harsh signal
environments. Configured with a female TNC connector at
both the input and output side. This allows the
amplifier to be placed in-line with the antenna system's
coaxial cable. Normally, the amplifier is positioned
within 6 ft of the antenna.
For use with all products (except NTPSync II and NTPSyncXLS) that only
require L1 band GPS signals.
Note: Versions available
with amplification factors of 5dB and 10 dB.
|
0810429 |
|
| |
|
|
|
|
| |
|
30 dB
L1 Screw-On Amplifier -
Dual SAW band-pass filters
provide improved system performance in areas with very
harsh signal environments. Configured with a male TNC
connector at the input side and a female TNC connector
at the output side. This allows the amplifier to
screw directly on to the GPS antenna without the need
for additional cables. Extra protection from the
environment is provides to the amplifier when the
antenna is installed using a pipe that also surrounds
the amplifier.
For use with all products (except NTPSync II and NTPSyncXLS) that only
require L1 band GPS signals.
Note: Versions available
with amplification factors of 5dB and 10 dB.
|
0810434 |
|
| |
|
|
| |
L1/L2 GPS Amplifiers |
|
|
| |
|
20 dB
L1/L2 In-Line Amplifier -
Configured with a female TNC connector at both the input
and output side. This allows the amplifier to be
placed in-line with the antenna system's coaxial cable.
Normally, the amplifier is positioned within 6 ft of the
antenna.
For use with all products that require L1 and L2 band
GPS signals. |
0810397 |
|
| |
|
|
|
|
| |
|
20 dB
L1/L2 Screw-On Amplifier -
Configured with a male TNC
connector at the input side and a female TNC connector
at the output side. This allows the amplifier to
screw directly on to the GPS antenna without the need
for additional cables. Extra protection from the
environment is provides to the amplifier when the
antenna is installed using a pipe that also surrounds
the amplifier.
For use with all products that require L1 and L2 band
GPS signals.
|
0810403 |
|
| |
|
|
|
Antenna Cables |
|
|
| |
|
 50
Feet RG-59 Cable (TNC-Type Connectors) (5 dB loss)
|
0420166 |
|
| |
|
100
Feet RG-59 Cable (TNC-Type Connectors) (10 dB loss)
|
0420167 |
|
| |
|
150
Feet RG-59 Cable (TNC-Type Connectors) (15 dB loss)
|
0420200 |
|
| |
|
200
Feet RG-59 Cable (TNC-Type Connectors) (20 dB loss) |
0420168 |
|
| |
|
250
Feet RG-59 Cable (TNC-Type Connectors) (25 dB loss) |
0420169 |
|
| |
|
300
Feet RG-59 Cable (TNC-Type Connectors) (30 dB loss) |
0420170 |
|
| |
|
300
Feet LMR400 Cable (TNC-Type Connectors) (18 dB loss) |
0420171 |
|
| |
|
400
Feet LMR400 Cable (TNC-Type Connectors) (23 dB loss) |
0420172 |
|
| |
|
500
Feet LMR400 Cable (TNC-Type Connectors) (28 dB loss) |
0420173 |
|
| |
|
|
|
|
GPS
Time and Frequency Systems
